WB2X8228 Range Burner Receptacle Replacement for Kenmore

(1 review) Write a Review
SKU: APNWB2X8228K     
CONDITION: New
$24.63
$10.25
(You save $14.38 )
Compatible Brands:
GE
Compatible Brands:
Hotpoint
Compatible Brands:
Kenmore

Replacement burner receptacle used for some GE, Hotpoint, and Kenmore range models.

Directly Replaces: WB2X8228, WB02X8228, WB62X5358, WB62X5393, WB62X5394, WB62X5397, WB62X5401, WB62X5405, RR228,  250535, AH242972, AP2013499, EA242972, EAP242972, PD00001235, PS242972.

Features:

  • Socket that the burner elements plug in to connect your burner to the cooktop. 
  • Bakelite range block.
  • Mounting bracket has a metal tab bent at 180 degrees.
  • Includes (1) Range Block with Leads, (1) Mounting Clip, (1) Installation Screw.

Specifications:

  • Color: Black.
  • Material: Plastic / Metal.
  • Block Dimensions: 1-7/8"L x 1-3/8"W x 3/4"H.
  • Additional Dimensions: Leads extend 24-3/4" from range block.

Speedy Repair Tips 

About this Part: The receptacle is the socket that the burner element plugs into and connects your burner to the cooktop. Over time the receptacle contacts can burn out.

Typical Failure Symptoms: Poor operation of burner; No operation of burner; Sizzling noise under the burner/cooktop.

Repair Difficulty:  2 out of 5 / Beginner to Moderate
Minimal disassembly (if any) and some basic tools may be needed.

Testing: Look at the receptacle contacts with a flashlight. If the terminals look burnt you will need to replace the element receptacle. Additionally, you should also make sure the element prongs are clean and are not burnt. If the prongs are also burnt, the element should be replaced as well.

Additional Tips: When checking the receptacle, also look at the element prongs for signs of burning. If burnt, the element and the receptacle should be replaced.

Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, Speedy Appliance Parts LLC, cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.

Type your model number into the box below to filter down the compatible models.
Where do I find my model number?

Don't see your model listed? Submit this form to get help with finding the right part.

  • just what I ordered
    5

    Posted by john stuff,sr. on 3rd Feb 2023


    art worked very well same as what I took out,well satisfy with the product