Replacement evaporator fan motor used for some Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Kenmore, Tappan, and White-Westinghouse refrigerator and freezer models.
Directly Replaces: 297250000, 216914200, 216934100, 297309000, 5304442624, 7216914200, 7216934100, 7297250000, SM2500, 2026100, AH2349477, AH3502361, AP5323819, AP4368950, EA3502361, EA2349477, EAP2349477, PD00074129, PS2349477, PS3502361.
Features:
- The evaporator motor pulls air through the evaporator coils to remove heat from the circulating air within the unit.
- Mounting screws holes on the motor do not come threaded from the factory. You must re-use the old self tapping screws.
- Rear mount.
- Includes (1) Evaporator Fan Motor with 3-Wire Harness and Plug.
Specifications:
- Color: Gray / White / Black / Yellow.
- Material: Plastic / Metal.
- Electrical Specs: 115VAC, 60Hz, 8W, 0.18A, Min-20degF, Cl.A.
- Dimensions: 2-5/8"L x 2-5/16"W x 2-3/4"H.
- Additional Dimensions: Harness and plug extend 8-1/4"L from motor.
Type your model number into the box below to filter down the compatible models.
Where do I find my model number?
Don't see your model listed? Submit this form to get help with finding the right part.
-
fan
works good
-
Great replacement part
Part worked great. Excellent price, simple installation
-
Freezer evap fan motor
This motor has only been operating for a day now, but so far so good. It is very quiet compared to the OE one which was failing.
A couple small issues:
* The 2 holes seem a bit large for the self-tapping screws. They threaded in very easily, but did snug up OK.
* The terminals in the connector are free to move around a bit. At first it would not mate with the connector for the freezer wiring. Initially I thought maybe it was the wrong size/type, but I found that if I held the 3 wires and wiggled them I could get the connectors to mate.
* The original motor was made by A.O. Smith. This motor is mfr'd by Huayi. None of the parts vendors I checked had an A.O. Smith motor. One had photos of the A.O. Smith part, but when I received it, it was Huayi. It cost twice as much so I returned it and ordered this one. -
Great replacement.
Had to tap threads for mounting but this saved me over $100 over the or part
